Wood insect repellent SCJ-4

Wood insect repellent SCJ-4 Product Introduction

This wood insect repellent is a new type of colorless, transparent, and low toxicity wood insect repellent that can be used to protect all types of wood, including applications suitable for adding insect protection during the synthesis of plywood and artificial boards, to protect them from wood boring pests such as termites, bark beetles, longhorn beetles, aphids, planthoppers, whiteflies, cockroaches, and decay fungi.

Wood insect repellent SCJ-4 Functional Features

1. Strong anti loss property: This product can penetrate into the wood completely without residue on the surface. Its effective ingredients precipitate in the wood and will not decompose or evaporate like other insecticides.
2. Low toxicity and environmental protection: not easily volatile or lost, will not cause pollution to the environment, and the treatment of wood is harmless to humans and animals.
3. Strong applicability: The treated wood will restore its original color after drying, without any impact on subsequent processes such as painting and bonding of the wood.
4. Good thermal stability: In medium to high temperature environments of 100-180 ℃ (such as conventional industrial drying, hot bonding, and short-term storage temperatures), the chemical structure of this product is stable and will not cause the effective ingredients to fail or produce toxic impurities due to temperature.
5. Widely applicable: can directly process wood, can be added to glue processing plywood, and can be added to coatings to prevent insects and insect eggs.

Wood insect repellent SCJ-4  SDS

Wood insect repellent SCJ-4 Scope of Application

Widely applicable for insect and insect egg prevention treatment of all raw wood, wooden crafts, wooden furniture, solid wood flooring, wooden doors and windows, wooden corner lines, wooden blinds, wooden fences, plywood, artificial boards and other wood products.

Wood insect repellent SCJ-4 Concentration used

Dilution ratio: This product is diluted with water in a ratio of 1:10-15.

Wood insect repellent SCJ-4 Usage

1. Spray and brushing treatment method:

It is recommended to mix water in a ratio of 1:10 and spray it once until it is completely moist. The higher the concentration, the more insect proof dose the wood absorbs, and the better the effect.

2. Soaking treatment method:

It is recommended to mix water in a ratio of 1:15. When treating wood, soak the material to be treated completely in the prepared treatment solution for 15-20 minutes; When processing rattan or willow, soak the processed material completely in the finished liquid for 5-10 minutes, depending on the density and thickness of the material to be processed.

3. Add usage:

The recommended addition ratio is 2-3%. Add the original solution and adhesive or coating according to this ratio before use.

Wood insect repellent SCJ-4 Special note:

1. The processing method for adding and using varies depending on the composition of the coating and adhesive. Before use, it is necessary to conduct tests to see if there are any changes in viscosity, delamination, precipitation, or other phenomena after adding. At the same time, it should also be considered whether the film performance, adhesion, water resistance, weather resistance and other properties have an impact.
2. Regardless of the method used, newly processed wood should be protected from rain and snow. Outdoor wood surfaces used for long-term protection should be painted or dyed. For indoor use, wood surfaces do not need to be painted unless they are repeatedly in contact with moisture (such as in saunas or bathrooms).

Wood insect repellent SCJ-4 Precautions

Operators are required to wear protective goggles, gloves, and masks. Try to avoid skin contact with wood insect repellents. If accidentally touched, rinse with water promptly.

Wood insect repellent SCJ-4 Storage

Store at room temperature in a cool and dry place, away from open flames.