[Packaging Specifications] 25KG 1000KG
[Shelf Life] 3 Years
This product is a new type of wood anti-cracking product that is specially designed for hardwood that has internal stress changes due to climate, moisture, and storage environment, which causes wood end cracks, surface cracking, cracking, and local internal cracking. It mainly uses vacuum pressurization, steaming, soaking, etc. to allow the effective ingredients of the anti-cracking agent to enter the wood to adjust the balance of the water content in the wood and the air, thereby achieving the stability of the wood and reducing the wood cracking and cracking caused by moisture changes. It has excellent protective properties and is widely used in natural logs and board drying, natural drying during board storage, and the prevention and improvement of cracking on the surface of furniture boards caused by the climate differences between the north and the south.
Widely used in natural logs and board drying, natural drying during board storage, and the prevention and improvement of cracking on the surface of furniture boards caused by the climate differences between the north and the south.

【Product Features】
This product is colorless and odorless, environmentally friendly, completely water-soluble, does not change the original color of the wood, does not affect the adhesion of the wood’s later paint, and can effectively prevent the end cracking, dry cracking, cracking, and internal cracking of the wood after steaming or pressurized improvement. After treatment, the effective ingredients combine with the wood fiber to stabilize the water content of the wood, so that the water content of the wood and the water content of the air reach a certain balance, and the wood can completely withstand wind and rain without cracking.
【Usage】
It can be steamed, soaked, sprayed, and vacuum high-pressure treated. Dilution concentration 1:5-10
1. Cooking process: First, put the wood into the cooking tank (cement tank, stainless steel tank, plastic tank). If a steel plate tank is used, it is recommended to do anti-corrosion treatment inside the steel plate (to prevent the steel plate from oxidizing and rusting and causing iron pollution in the wood). To ensure the personal safety of the operator, the depth of the cooking pool is recommended to be controlled below 1.5 meters. When the board is loaded into the pool, in order to ensure the fluidity of the modified liquid and the absorbency of the board, it is recommended to reserve a gap of at least 0.5cm between the boards when loading the pool. Then put the prepared wood anti-cracking agent and the aqueous solution diluted with tap water into the cooking tank (the surface of the liquid is based on the standard of completely covering the wood), and then start heating and heating. The heating speed (when the wood specific gravity is below 0.65g/cm3, the heating speed is 10-14 degrees per hour, when the wood specific gravity is about 0.65g/cm3-0.95g/cm3, the heating speed is 6-10 degrees per hour. When the temperature rises to 85-95 degrees, the insulation treatment starts. Each centimeter thick board is insulated for about 2-4 hours. By analogy, the required insulation time is calculated according to the actual thickness of the steamed board. After the board is steamed, when the water temperature drops below 40 degrees, the wood is taken out of the pool and naturally dried in the shade for 3-5 days before subsequent drying.
2. Soaking method: Place the wood in a soaking tank filled with the prepared anti-cracking agent (diluted with water at a ratio of 1:5-8), and soak at normal pressure for no less than 12 hours.
3. Brushing method: According to the dilution ratio of 1:5, brush the wood to be treated repeatedly for more than 3 times, and the absorption amount is 0.3 kg/square meter. It has certain anti-cracking performance.
4、真空加压操作工艺：按1:15比例稀释，先将木材含水率控制在15%以下（即接近干燥状态），即可进行真空加压处理（加压设备技术参数参考木材防腐处理设备），真空加压处理工艺参考CCA、ACQ木材防腐处理工艺（因工艺涉及压力容器，具体操作请联系我司售后技术人员进行操作指导）
适用：原木入库、板材入库、烘干、木质家具、木门窗、木楼梯、木地板、木菜板、木雕、木制工艺品、户外木屋、木栅栏、室内外木结构防护处理。