Usage and dosage:
The methods of using the sealing anti-cracking agent include brushing, roller coating, spraying, etc. In order to achieve excellent results, it is mainly used for wood that has just been felled or sawed. The cut surface should be as flat as possible during treatment. For rough surfaces, spraying is more uniform than brushing. You can use a brush, roller brush or sprayer. If you use a sprayer, the wood end anti-cracking agent emulsion is very thick, so the spray hole should be large enough with an aperture of about 0.55mm.
Precautions
This product is non-toxic and non-flammable. The wood end anti-cracking agent is non-flammable unless it is dried, that is, the flash point exceeds 205 degrees Celsius. Do not store this product in high temperature areas or near open flames.
